Setting Up The System - Denon AVR-4802R Operating Instructions Manual

7 SETTING UP THE SYSTEM

• Once all connections with other AV components have been completed as described in "CONNECTIONS" (see pages 6 to 13), make the
various settings described below on the monitor screen using the AVR-4802R's on-screen display function.
These settings are required to set up the listening room's AV system centered around the AVR-4802R.
• Use the following buttons to set up the system:
• Check that the remote control unit is set to AMP mode.
• System setup items and default values (set upon shipment from the factory)
Input the combination of speakers in your system and their
Speaker corresponding sizes (Small for regular speakers, Large for full-
Configuration size, full-range) to automatically set the composition of the
signals output from the speakers and the frequency response.
Use this function when using multiple surround speaker
combinations for more ideal surround sound. Once the
Surround
combinations of surround speakers to be used for the
Speaker
q
different surround modes are preset, the surround
Setting
speakers are selected automatically according to the
surround mode.
Crossover Set the frequency (Hz) below which the bass sound of the various
Frequency speakers is to be output from the subwoofer.
This selects the subwoofer speaker for playing deep bass signals.
Subwoofer mode
(see page 20)
This parameter is for optimizing the timing with which the audio
w
Delay Time signals are produced from the speakers and subwoofer according
to the listening position.
This adjusts the volume of the signals output from the speakers and
Channel
e
subwoofer for the different channels in order to obtain optimum
Level
effects.
Boundary Gain
compensation
THX Audio
r
Setup
Surround Back
Speaker Position
This parameter is for detecting the maximum level of the low bass
Subwoofer
signals output from the subwoofer channel in order to protect the
t
Peak Limit
subwoofer from damage and prevent unpleasant distorted sounds
Lev
from being produced.
Digital In This assigns the digital input jacks for the different input
y
Assignment sources.
Power AMP
Assignment
Multi Zone
u
Control
Multi Zone-1
vol. Level
i
Audio Delay Adjust the time delay of the video and audio signals. (see page 30)
This sets whether or not to display the on-screen display that
On Screen appears on the monitor screen when the controls on the remote
o
Display control unit or main unit are operated (from MONITOR 1 outputs
only).
Auto Tuner
!0
FM stations are received automatically and stored in the memory.
Presets
Set whether or not to lock the system setup settings so that they
!1
Setup Lock
cannot be changed.
16
System setup
When using a THX Ultra2 compatible
subwoofer, set the subwoofer's frequency
response.
When using two surround back speakers, set
the distance of the two speakers.
Set this to switch the surround back channel's
power amplifier for use for multi-zone 2.
This sets the output level for the multi-zone 1
output jacks.
SYSTEM SETUP button
Press this to display the system setup menu.
CURSOR buttons
and : Use these to move the cursors (
0 1
left and right
and : Use these to move the cursors (
• ª
up and down on the screen.
ENTER button
Press this to switch the display.
Also use this button to complete the setting.
Front Sp. Center Sp.
Small Small
DOLBY/
Surround
THX /
DTS
THX 5.1
mode
SURROUND
Surround
A A
speaker
Front L & R Center
12 ft (3.6 m) 12 ft (3.6 m)
Front L Front R Center
0 dB 0 dB 0 dB
The Distance Between SBL/SBR = 0 ft to 1 ft
Input
CD DVD VDP
source
Digital COAXIAL COAXIAL COAXIAL OPTICAL
Inputs 1 2 3
A1 ~ A8 87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz
B1 ~B8 520/600/1000/1400/1500/1710 kHz/90.1/90.1 MHz
C1 ~C8 90.1 MHz
D1 ~D8 90.1 MHz
E1 ~E8 90.1 MHz
and
0 1
on the screen.
and
• ª
Default settings
Subwoofer Surround Sp.
Yes Small
WIDE 5CH/7CH DSP
EXT. IN
SCREEN STEREO SIMULATION
A A A A
FIXED —THX—
LFE —THX—
Subwoofer Surround L & R
12 ft (3.6 m) 10 ft (3.0 m)
Surround Surround Surround
L R Back L
0 dB 0 dB 0 dB
THX Ultra2 Subwoofer = NO
Peak Limiter = OFF
TV DBS/SAT VCR-1 VCR-2 VCR-3
OPTICAL OPTICAL
OPTICAL
OFF
1 2 3 4
Surround Back
Variable
Audio Delay = 0 ms
On Screen Display = ON
Setup Lock = OFF
) to the
) to the
Surround Back Sp.
Small / 2spkrs
— —
— —
SBL & SBR
10 ft (3.0 m)
Surround
Subwoofer
Back R
0 dB 0 dB
TAPE V. AUX —
OPTICAL
OFF —
5