LPSYSTEM Installation
Use the following procedures to install LPSYSTEM:
Note:
The following must be executed from the Bourne Shell. Type: SH ENTER to
enter the Bourne Shell program.
1. lpsystem -t bsd <IP_address_of_EcoLAN 1000E>
Enter EcoLAN 1000E host name in /etc/hosts file. Your system may want its IP address
instead of the remote host name.
2. lpadmin -p <local printername> -s <remote host name or IP address>!PORT1
Note:
There is no space after the remote host name.
3. Enable <local printername>
4. Accept <local printername>
TCP/IP Configuration 7-27