Mita DP-2800 Instruction Handbook Manual page 144

DESCRIPTION
"This variable specifies the unit's default
gateway address."
::= { dpitcp 4 }
-- Default value reported on
defaulthostport OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable specifies the base TCP port number of the
host printing solution. The default base port number
is 10000."
::= { dpitcp 5 }
lpdportTable OBJECT-TYPE
SYNTAX SEQUENCE OF LpdportEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the LPD filter settings for each
printer port."
::= { dpitcp 6 }
lpdportEntry OBJECT-TYPE
SYNTAX LpdportEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"LPD filter settings per LPD port."
INDEX { lpdPort }
::= { lpdportTable 1 }
LpdportEntry ::= SEQUENCE {
lpdPort INTEGER,
filtertype INTEGER,
ffenable
bannerenable DisplayString
}
lpdPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port Index"
::= { lpdportEntry 1 }
-- There is only on eport in NIC. Index is 1.
filtertype OBJECT-TYPE
SYNTAX INTEGER (0..65535) { pcl (1), postscript (2), ascii (4),
NIC MIB Definition Appendix C-18
NIC is no value, indicating that there is no value in NVRAM
DisplayString,