Status Report - Mita DP-2800 Instruction Handbook Manual

When the Green LED...
blinks slowly.
blinks rapidly.

8.2 Status Report

The Status/Configuration report is sent as a print job to the printer when the print
server is powered on. For example, the report on the next page shows the
configuration of the print server immediately before the report is printed. The Status
report may also be printed from the printers's front panel by pressing the Status key.
It is strongly recommended that you review this report immediately after installation
and any time the setup has been changed. If the report does not include a protocol that
was configured, check that the procedure was done properly.
Operation and Troubleshooting 8-2
And the printer is...
awaiting print jobs.
awaiting print jobs.
THEN EcoLAN 1000E..
detects that one or more
printers needs attention.
This means a printer could
be off-line or a form
change is required.
detects a serious error
which prevents it from
functioning properly.