To set the printer's IP Address, follow these steps:
1. Open KyoManage.
2. Highlight the desired Mita printer and click on Select.
3. Open the LAN Printer Server menu and select Protocol Setup.
4. Enter the appropriate on/off settings for NetWare and TCP/IP. LAT for DEC sys-
tems is not functional for the EcoLAN 1000E.
5. For TCP/IP, set the IP Address, the Subnet Mask and the Default Gateway.
6. Choose OK and exit KyoManage.
Setting the IP Address will cause the EcoLAN 1000E to reset and print a Network
Status Page. On large networks the status page may take several minutes to print. The
new IP Address may be verified on the Network Status Page.
EcoLAN 1000E and the Macintosh Computer 6-14