Using The Map Program; Extensive On-Line Help - Mita DP-2800 Instruction Handbook Manual

4. Select RUN from the menu.
5. For Windows 95 type interfaces, select RUN from the Start menu.
6. At RUN, type A:\SETUP.EXE or B:\SETUP.EXE and click on the OK button.
7. Read the information on the MAP setup program screen.
Click Cancel to quit setup and then close any programs you have running.
Click Next to continue with the setup program.
8. Identify a path for the program. The path default is C:\MAP. You can change the
path or use the default. The installation begins.
When the installation is complete, remove the diskette from the disk drive.
3.3

Using the MAP Program

When you click on the Management Access Program in Windows to start the program,
the program will prompt you with a list of print servers listed by their SAP
identification. Select the print server you want to access. The program will setup a link
to the print server and obtain HTML code describing the home page.
To get the EcoLAN 1000E name (if different from the SAP ID), do the following:
1. Select a Print Server from the Server list.
2. Select Show Detail under the Options menu.
To get detailed information for all EcoLAN 1000E's, do the following:
1. Select Show All under the Options menu.
Because this operation requires that each EcoLAN 1000E be accessed, it may take
a long time to complete if there are many EcoLAN 1000E.
3.3.1

Extensive On-Line Help

When using the MAP program, there is an extensive on-line help system which fully
explains all of the program's features and menus. The on-line help is context-sensitive.
Using the Management Access Program or a Standard Web Browser 3-2