Mita DP-2800 Instruction Handbook Manual page 69

7.1.1.6Setting up IP Parameters
The EcoLAN 1000E provides for a setup connection via the standard Telnet port. To
be able to make changes to a unit with factory default settings, you must logon as
"sysadm". The default password is also "sysadm" (This password can be changed
from the Telnet utility). Section 7.4 Running Telnet on page 40 describes the use of the
Telnet utility.
1. Telnet to the EcoLAN 1000E (the login and password are both sysadm).
2. Turn off the protocols that you are not utilizing (option 3).
3. Setup the subnet mask and default gateway for the EcoLAN 1000E if applicable
(menu option 1). (If you used BOOTP, this will already have been done).
4. Exit, Save and Reset the EcoLAN 1000E.
You can also use the HTML pages accessible via MAP or a Web Browser to setup lpr.
The password to change parameters with the HTML pages is the same as the Telnet
password.
7.1.1.7Loading the lpr Spooler
The Windows lpr Spooler Version 4.1 - User's Guide (wlprspl.txt) provides detailed
instructions for decompressing and installing the shareware lpr spooler.
7.1.1.8Creating an lpr Queue on the Workstation
Once you install the spooler onto the workstation, the setup program will create a
group and icon.
1. Double click on the spooler icon.
2. Click on setup, and define a new queue.
3. At the Remote Host Name prompt enter the EcoLAN 1000E IP Address. Enter
PORT1 for the Remote Printer Name
4. Go to Control Panel, Printers, and choose Connect.
5. Select your driver and click on Next.
At this point, you should see an entry for your Windows lpr Spooler's printer in the
"Available ports" listing. For example, C:\SPOOL\PRINTER_NAME.
TCP/IP Configuration 7-5