Mita DP-2800 Instruction Handbook Manual page 130

STATUS mandatory
DESCRIPTION
"This variable contains the status report on power up options.
The state can be no report, print ascii report or print
postscript report.
0 - no ASCII report
1 - print ASCII report
2 - no postscript report
3 - print postscript report
65535 - unsupported"
::= { dpidiag 6 }
-- NIC defaults to
serialnumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable specifies the Serial Number of the unit; form is six decimal
digits."
::= { dpidiag 7 }
enetAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet Address, six
even on tokan ring boards"
::= { dpidiag 8 }
tokenAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Token Ring Address,six 8-bit binary values. Derived Token Ring address
is given even on ethernet boards"
::= { dpidiag 9 }
totalports OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total Number of ports."
::= { dpidiag 10 }
-- NIC value is '1'
numserialports OBJECT-TYPE
SYNTAX INTEGER (0..65535)
NIC MIB Definition Appendix C-4
enum 3
8-bit binary values.Derived ethernet address is given