Borderless Printng Not Possible; Check Supported Paper; Check Roll Position - Canon 2160B002 User Manual

Borderless printng not possible.

Check roll position.

The paper is loaded askew.
The paper loaded is not compatible with borderless
printing.
Because paper expands or contracts depending on
the environment of use, it may become narrower or
wider than the supported width for borderless printing.

Check supported paper.

The print job received species a type or width of
paper that is not compatible with borderless printing.
Cause
Cause
Corrective Action
Press the Load/Eject button and reload the paper.
Insert the roll rmly until it touches the ange of the
Roll Holder.
(→P.107)
(→P.109)
(→P.110)
If you press the Online button and continue printing,
the document will be printed with a border.
Load paper compatible with borderless printing and
try printing again. Paper you can use for borderless
printing is restricted to particular types of paper and
rolls of particular widths. For information on types of
paper compatible with borderless printing, refer to the
Paper Reference Guide.
(→P.95)
Use each type of paper only where the recommended
environmental conditions are met. For details on
environmental conditions for various paper, see the
Paper Reference Guide.
(→P.95)
Corrective Action
Follow these steps to change the settings of the print
job to enable borderless printing.
1.
Hold down the Stop button for a second or more
to cancel printing.
2.
Make sure the correct printer driver for the printer
is selected and try printing again.
For information on types of paper compatible with
borderless printing, refer to the Paper Reference
Guide.
(→P.95)
If you press the Online button and continue printing,
the document will be printed with a border.
Messages regarding paper
Error Message 637