Canon 2160B002 User Manual page 584

Printheads
Replacing the Printhead
Follow the steps below to replace the Printhead. Failure to follow this procedure may cause ink leak from
the Printhead, which may cause stains.
Note
•
Prepare a new Ink Tank when ink levels are low.
•
Your hands may become dirty during Printhead replacement. Use the gloves provided with the new
Printhead for replacement.
•
Choose On in Auto Print to have the printer automatically adjust the Printhead alignment after
replacement of the Printhead. (→P.48)
1.
If the roll is not ejected because of the cutting method selected, cut it manually and remove it.
(→P.401)
2.
Clean inside the Top Cover. (→P.589)
3.
Press the Menu button to display MAIN MENU.
4.
Press ▲ or ▼ to select Maintenance, and then press the ► button.
5.
Press ▲ or ▼ to select Replace P.head, and then press the ► button.
6.
Press ▲ or ▼ to select Yes, and then press the OK button.
Ink is now lled.
After about three minutes, a message is shown on the Display Screen instructing you to open
the Top Cover.
7.
Open the Top Cover.
Instructions are now shown on the Display Screen regarding Printhead replacement.
570 Maintenance