System Setup - Canon 2160B002 User Manual

Control Panel
Maintenance
Setting Item
Repl. maint cart
Replace P.head
Repl. S. Cleaner
Change Cutter
Move Printer

System Setup

Setting Item
Warning
Keep Media
Size
Paper Size
Basis
56 Printer Parts
When replacing the Maintenance Cartridge, choose Yes and follow the instructions
on the screen. (→P.579)
Not displayed during a warning message that the remaining Maintenance Cartridge
capacity is low.
When replacing the Printhead, choose Yes and follow the instructions on the
screen. (→P.569)
When replacing the Shaft Cleaner, choose Yes and follow the instructions on the
screen. (→P.579)
When replacing the Cutter Unit, choose Yes and follow the instructions on the
screen. (→P.577)
You can also reset the cut counter after the Cutter Unit is replaced.
Not displayed during a warning message that the remaining Maintenance Cartridge
capacity is low.
When transferring the printer to another location, choose Yes and follow the
instructions on the screen. (→P.594)
Buzzer Set the buzzer. Choose On for the buzzer to sound once for warnings
and three times for errors.
Detect Choose Warning for notication (display of a warning message)
Mismatch during printing if the paper type specied in the printer menu does not
match the paper type in the printer driver. Choose None to continue
to print without notication. Choose Pause to have printing paused
under these circumstances. In this case, you can continue printing by
pressing the Online button.
Choose On to use the paper size setting as the basis for printing instead
of other settings. The margin setting of the printer menu will be used
instead of the margin setting of the printer driver if the latter is smaller,
which may prevent text or images in the margin from being printed.
Choose Off to use the printer driver settings instead. Even if the margin
setting of the printer driver is smaller than that of the printer driver,
text or images will not be cut off. However, this requires longer paper
because the actual margin will be equal to the margin setting of the
printer driver plus the margin setting of the printer menu.
Sht Selection 1 If sheet size detection is activated, choose whether ISO A3+ or
13"x19"(Super B) is applied when an intermediate size is detected.
Description, Instructions
Description, Instructions