Canon 2160B002 User Manual page 525

Conguring the Printer's NetWare Network Settings
Follow the steps below to congure the NetWare network settings.
1.
Start the web browser and enter the following URL in the Location (or Address ) box to display
the RemoteUI page.
http://"printer IP address or name"/
Example: http://xxx.xxx.xxx.xxx/
2.
Select Administrator Mode and click Logon.
3.
If a password has been set on the printer, enter the password.
4.
Click Network in the Device Manager menu at left to display the Network page.
5.
Click Edit in the upper-right corner of the NetWare group to display the Edit NetWare Protocol
Settings page.
6.
Refer to the NetWare Settings Items table to complete the settings.
NetWare Settings Items
Item
Frame Type
NCP Burst Mode
Print Application
Packet Signature
Bindery File Server Name
PServer
Print Server Name
Print Server Password
Polling Interval
RPrinter Print Server Name
Details
Specify the type of frame to
use in NetWare.
Activate this setting to use
NCP Burst Mode.
This mode supports fast data
transfer when printing in queue
server mode. Normally, leave
the setting On.
Choose the print service.
•
Bindery PServer
•
RPrinter
•
NDS PServer
•
NPrinter
Select If Requested by Server
to use packet signature.
Specify the name of a le
server that has a NetWare print
server.
(0-47 characters)
Specify the name of a NetWare
print server.
(0-47 characters)
Set a password for the print
server.
(0-20 characters)
Specify the interval to conrm
jobs.
(1-15 seconds)
Specify the name of a NetWare
print server.
(0-47 characters)
Network Setting
Default Setting
Disabled
On
NDS PServer
If Requested by Server
-
-
-
5
-
Network Setting 511