Changing The Default Copy Settings; Using Special Copy Features - Dell 1135 Mono Laser User Manual

job.
Press Copy (
1.
Press Menu (
2.
Press the left/right arrow until Copy Feature appears and press OK.
3.
Press the left/right arrow until Original Type appears and press OK.
4.
Press the left/right arrow until the image mode you want appears and press OK.
5.
Text: Use for originals containing mostly text.
Text/Photo: Use for originals with mixed text and photographs.
Photo: Use when the originals are photographs.
Press Stop/Clear (
6.
Reducing or enlarging copies
You can reduce or enlarge the size of a copied image from 25% to 400% when you copy original documents from
the scanner glass, or from 25% to 100% from the ADF.
To select from the predefined copy sizes:
Press Copy (
1.
Press Menu (
2.
Press the left/right arrow until Copy Feature appears and press OK.
3.
Press the left/right arrow until Reduce/Enlarge appears and press OK.
4.
Press the left/right arrow until the size setting you want appears and press OK.
5.
Press Stop/Clear (
6.
To scale the copy by directly entering the scale rate:
Press Copy (
1.
Press Menu (
2.
Press the left/right arrow until Copy Feature appears and press OK.
3.
Press the left/right arrow until Reduce/Enlarge appears and press OK.
4.
Press the left/right arrow until Custom appears and press OK.
5.
Press the left/right arrow or numeric keypad to enter the copy size you want. Pressing and holding the
6.
left/right arrow allows you to quickly scroll to the number you want.
Press OK to save the selection.
7.
Press Stop/Clear (
8.
When you make a reduced copy, black lines may appear at the bottom of your copy.

Changing the default copy settings

The copy options, including darkness, original type, copy size, collation, and number of copies, can be set to those
most frequently used. When you copy a document, the default settings are used unless they have been changed by
using the corresponding buttons on the control panel.
Press Copy ( ) on the control panel.
1.
Press Menu ( ) on the control panel.
2.
Press the left/right arrow until Copy Setup appears and press OK.
3.
Press the left/right arrow until Change Default appears and press OK.
4.
Press the left/right arrow until the setup option you want appears and press OK.
5.
Press the left/right arrow until the setting you want appears and press OK.
6.
Repeat steps 5 through 6, as needed.
7.
PressStop/Clear (
8.
While you are setting copy options, pressing Stop/Clear (
defaults.

Using special copy features

) on the control panel.
) on the control panel.
) to return to ready mode.
) on the control panel.
) on the control panel.
) to return to ready mode.
) on the control panel.
) on the control panel.
) to return to ready mode.
) to return to ready mode.
) cancels the changed settings and restores the