Power Problems; Paper Feeding Problems - Dell 1135 Mono Laser User Manual

Power problems

Click this link to open an animation about solving power problems.
The machine is not receiving power,
or the connection cable between the computer and the
machine is not connected properly.

Paper feeding problems

Condition
Paper jams during printing. Clear the paper jam (See
Paper sticks together.
Multiple sheets of paper do
not feed.
Paper does not feed into
the machine.
The machine is experiencing problems that require service such as LSU error or fuser
error.
Condition
Check the maximum paper capacity of the tray (See
Make sure that you are using the correct type of paper (See
specifications ).
Remove paper from the tray and flex or fan the paper.
Humid conditions may cause some paper to stick together.
Different types of paper may be stacked in the tray. Load paper of only one type, size,
and weight.
Remove any obstructions from inside the machine.
Paper has not been loaded correctly. Remove paper from the tray and reload it
correctly.
There is too much paper in the tray. Remove excess paper from the tray.
The paper is too thick. Use only paper that meets the specifications required by the
machine (See Print media specifications
If an original does not feed into the machine, the document feeder rubber pad may
Suggested solutions
Plug in the power cord and press Power (
the control panel.
Disconnect the machine cable and reconnect it.
For Local Printing
For Network Printing (network model only)
Suggested solutions
Clearing paper jams).
).
Print media specifications
Print media
) on
).