Printing Files; Configuring Printer Properties - Dell 1135 Mono Laser User Manual

In the LPR GUI window, select the model name of your machine from the printer list and click Properties.
3.
Change the print job properties using the following four tabs displayed at the top of the window.
4.
General: This option allows you to change the paper size, the paper type, and the orientation of the
documents. It enables the duplex feature, adds start and end banners, and changes the number of pages
per sheet.
Text: This option allows you to specify the page margins and set the text options, such as spacing or
columns.
Graphics: This option allows you to set image options that are used when printing image files, such as color
options, image size, or image position.
Advanced: This option allows you to set the print resolution, paper, source and special print features.
If an option is grayed out, it means that the grayed out option is not supported.
Click Apply to apply the changes and close the Properties window.
5.
Click OK in the LPR GUI window to start printing.
6.
The Printing window appears, allowing you to monitor the status of your print job.
7.
To abort the current job, click Cancel.

Printing files

You can print many different types of files on your machine using the standard CUPS way, directly from the
command line interface. The CUPS lpr utility allows you to do that. But the drivers package replaces the standard lpr
tool by a much more user-friendly LPR GUI program.
To print any document file:
Type lpr <file_name> from the Linux shell command line and press Enter. The LPR GUI window appears.
1.
When you type only lpr and press Enter, the Select file(s) to print window appears first. Just select any files
you want to print and click Open.
In the LPR GUI window, select your machine from the list, and change the print job properties.
2.
Click OK to start printing.
3.

Configuring Printer Properties

Using the Printer Properties window provided by the Printers configuration, you can change the various
properties for your machine as a printer.
Open the Unified Driver Configurator.
1.
If necessary, switch to Printers configuration.
Select your machine on the available printers list and click Properties.
2.
The Printer Properties window opens.
3.