Classic Control Panel - HP 615N - JetDirect Print Server Setup Manual

Classic Control Panel

Classic control panels can typically display
two lines of 16 characters each.
As described in
EIO control panel menu allows you to enable
or disable network protocols, and configure
selected network parameters. On the control
panel display, an asterisk (*) is used to
identify the selected value.
Table C-1. EIO Classic Control Panel Menu (1 of 3)
Menu Item
CFG NETWORK=
TCP/IP=
IPX/SPX=
DLC/LLC=
ATALK/ETALK=
ENWW
Table C-1, the HP Jetdirect
Description
Selects whether or not you want to access the Jetdirect
menu.
NO (default): Bypass the HP Jetdirect menu.
YES: Access the HP Jetdirect menu. You must
change this to YES* each time you want to access
the menu.
Identifies whether the protocol stack is enabled or
disabled.
ON (default). The protocol is enabled.
OFF: The protocol is disabled.
HP Jetdirect EIO Control Panel Menus 37