HP 615N - JetDirect Print Server Setup Manual page 41

Table C-2. EIO Graphical Control Panel Menu (2 of 5)
Menu Item Options
CONFIG
METHOD
DHCP RELEASE This menu appears if CONFIG METHOD
DHCP RENEW
ENWW
Description of settings
Specifies the method that TCP/IP
parameters will be configured on the
Jetdirect print server.
BOOTP: Use BootP (Bootstrap
Protocol) for automatic configuration
from a BootP server.
DHCP: Use DHCP (Dynamic Host
Configuration Protocol) for automatic
configuration from a DHCP server. If
selected and a DHCP lease exists,
DHCP RELEASE and DHCP
RENEW menus will be available to set
DHCP lease options.
AUTO IP: Use automatic link-local IP
addressing. An address in the form
169.254.x.x will be automatically
assigned.
MANUAL: Use the Manual Settings
option to configure TCP/IP
parameters.
was set to DHCP and a DHCP lease for
the print server exists.
NO (default): The current DHCP lease
is saved.
YES: The current DHCP lease along
with the leased IP address are
released.
This menu appears if CONFIG METHOD
was set to DHCP and a DHCP lease for
the print server exists.
NO (default): The print server does
not request to renew the DHCP lease.
YES: The print server requests to
renew the current DHCP lease.
HP Jetdirect EIO Control Panel Menus 41