HEIDENHAIN ITNC 530 - PILOT SMART NC Manual page 32

Navigating in smarT.NC
When developing smarT.NC, care was taken to ensure that the operating
keys familiar from conversational programming (ENT, DEL, END, ...) are
usable in a nearly identical manner in the new operating mode. The keys
have the following functions:
Function when tree view is active (left side of screen)
Activate form in order to enter or change data
Conclude editing: smarT.NC automatically calls the file
manager
Delete selected machining step (entire unit)
Position highlight to next/previous machining step
Show symbols for detail forms in tree view, if an arrow
pointing to the right is displayed in front of the tree view
symbol, or switch to the form if the detail view is already
open
Hide symbols for detail forms in tree view, if an arrow
pointing down is displayed in front of the tree view
symbol
32
Key