HEIDENHAIN ITNC 530 - PILOT SMART NC Manual page 186

Starting the DXF converter from a form
U Select the smarT.NC operating mode
U Select any machining step for which contour programs or
point files are necessary
U Select the input field in which the name of the contour
program or point file is to be defined
U To start the DXF converter: Press the SHOW DXF soft key.
smarT.NC opens a pop-up window with available DXF-files.
If necessary, select the directory in which the DXF file to be
opened is saved. Select one of the displayed DXF files and
confirm your selection with the ENT key or the OK button.
The TNC starts the DXF converter, with which you select
the desired contour or positions, and can save the contour
name or the name of the point file directly in the form (see
"Processing DXF Files (Software Option)" on page 182)
186