Setting The Dual Receive Restart Setting; Setting The Channel Signal Reception Time When Using The Dual Reception Function - Yaesu FTM-100DR/DE Operating Manual

Setting the dual receive restart setting

Set how the transceiver dual receive mode operates after the signal on the home
channel disappears by selecting one of the following 2 options:
(1) Restarts dual receive operation in 3 seconds (AUTO).
(2) Stops dual reception and continues receiving signals on the home channel (HOLD).
1
Press and hold
The Setup menu appears.
2
Rotate the DIAL to select [5 SCAN], and then press
.
The menu list appears.
3
Rotate the DIAL to select [1 DUAL WATCH STOP],
then press
The setting options appear.
4
Rotate the DIAL to select the desired setting.
Select "1 AUTO" or "2 HOLD".
Tip
The default setting: 1 AUTO
5
Press and hold
Sets the dual reception restart setting and returns the display to the previously
viewed screen.

Setting the channel signal reception time when using the dual reception function

Set the time interval to check the HOME channel when using the dual reception function.
1
Press and hold
The Setup menu appears.
2
Rotate the DIAL to select [5 SCAN], and then
press .
The menu list appears.
3
Rotate the DIAL to select [4 DUAL WATCH
MODE], then press
The setting options appear.
4
Rotate the DIAL to select the time interval to check
the home channel.
Select one from [0.3sec] to [10sec].
Tip The default setting: 5.0 sec
Supplement The HOME channel reception time is fixed to
0.3sec.
5
Press and hold
Sets the time interval to check the Home channel and returns the screen to the
previously viewed screen.
for over one second.
.
for over one second.
for over one second.
.
for over one second.
Monitoring the home channel
71