Advertisement
Quick Links
IARMOR EDGE™
BEFORE INSTALLATION
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE
PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE
STARTING INSTALLATION. ASSISTANCE IS RECOMMEND-
ED. THANK YOU FOR CHOOSING OUR PRODUCT!
*ROCKER PANEL MOUNT
*DRILLING NOT REQUIRED
PART LIST
Driver Side Step Bar
Pedal
Drain
Hole at
Bottom
iArmor
1#
2#
2#
Note:
Step bars are NOT interchangeable. Make sure drain holes at the
bottom will be located at the rear direction of the step bars.
Customer Support: info@iarmorauto.com
Torque Value
Fastener Size
6mm
8mm
10mm
12mm
14mm
Front
1
®
PART#: IA-N175H
Tightening Torque (ft-lbs)
6-7
16-18
31-32
56-58
92-94
Passenger Side Step Bar
2#
1#
1#
Drain
Hole at
Bottom
Rev. 20221201
Required
X
√
X
X
X
Pedal
Advertisement
Related Manuals for APS IARMOR EDGE IA-N175H
Summary of Contents for APS IARMOR EDGE IA-N175H
- Page 1 iArmor ® IARMOR EDGE™ PART#: IA-N175H Torque Value BEFORE INSTALLATION Fastener Size Tightening Torque (ft-lbs) Required REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. ASSISTANCE IS RECOMMEND- 16-18 √ ED. THANK YOU FOR CHOOSING OUR PRODUCT! 10mm 31-32 *ROCKER PANEL MOUNT...
- Page 2 iArmor ® Hardware Package A (For Brackets & Bars Installation) Item Description Item Description Driver Front / Passenger Center & Rear Mounting Brackets M8X1.25 Nylon Lock Nuts Passenger Front / Driver Center & Rear Mounting Brackets M8X1.25-20 T-Bolts M8 Plastic Washers M8 Plastic Washers M8 Large Flat Washers Hardware Package B (For Step Pedals Installation)
- Page 3 iArmor ® The instruction here is for your reference only. We strongly recommend the professional installer for best result. We are not responsible for any damage caused by the installation. STEP 1 Install (4) Pedals onto the step bars with (24) M8X1.25-25mm Hex Bolts, (24) M8 Large Flat Washers and (24) M8 Lock (Fig 1) Typical mounting location Washers.
- Page 4 iArmor ® STEP 5 Repeat Step 4 to install the Driver center Mounting Bracket and Driver Rear Mounting Bracket, (Fig 4). Insert the T-bolt Thread down the M8 with M8 Plastic Plastic Washer Washer in the against the step bar slot on the step bar and rotate the T-bolt to...
- Page 5 iArmor ® (Fig 7) Driver Side Step Bar Installation (6) M8 Plastic Washers (6) M8X1.25-20mm T-Bolts (6) M8 Large Flat Washers (6) M8 Nylon Lock Nuts Front Bottom View Customer Support: info@iarmorauto.com Rev. 20221201...
Need help?
Do you have a question about the IARMOR EDGE IA-N175H and is the answer not in the manual?
Questions and answers