Advertisement
Quick Links
IARMOR EDGE™
BEFORE INSTALLATION
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE
PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE
STARTING INSTALLATION. ASSISTANCE IS RECOMMEND-
ED. THANK YOU FOR CHOOSING OUR PRODUCT!
*ROCKER PANEL MOUNT
*DRILLING NOT REQUIRED
PART LIST
Driver Side Step Bar
Pedal
Drain
Hole at
Bottom
iArmor
Front
1#
1#
Note:
Step bars are NOT interchangeable. Make
sure drain holes at the bottom will be located at
the rear direction of the step bars.
Customer Support: info@iarmorauto.com
®
Torque Value
Fastener Size
Tightening Torque (ft-lbs)
6mm
8mm
10mm
12mm
14mm
2#
2#
1
PART#: IA-N189H
Required
6-7
X
16-18
√
31-32
X
56-58
X
92-94
X
Passenger Side Step Bar
Pedal
Drain
Hole at
Bottom
Rev. 20221201
Advertisement
Related Manuals for APS iArmor EDGE IA-N189H
Summary of Contents for APS iArmor EDGE IA-N189H
- Page 1 iArmor ® IARMOR EDGE™ PART#: IA-N189H Torque Value BEFORE INSTALLATION Fastener Size Tightening Torque (ft-lbs) Required REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. ASSISTANCE IS RECOMMEND- 16-18 √ ED. THANK YOU FOR CHOOSING OUR PRODUCT! 10mm 31-32 *ROCKER PANEL MOUNT...
- Page 2 iArmor ® Hardware Package A (For Brackets & Bars Installation) Item Description Item Description Driver Front / Rear Mounting Brackets M8 Nylon Lock Nuts Passenger Front / Rear Mounting Brackets M8X1.25-20 T Bolts M8 Plastic Washers M8 Plastic Washers M8 Large Flat Washers Hardware Package B (For Step Pedals Installation) Item Description...
- Page 3 iArmor ® The instruction here is for your reference only. We strongly recommend the professional installer for best result. We are not responsible for any damage caused by the installation. STEP 1 Front Install (2) Pedals onto the step bars with (12) M8X1.25-25mm Hex Bolts, (12) M8 Large Flat Washers and (12) M8 Lock (Fig 1) Driver Side Front Mounting Location Washers.
- Page 4 iArmor ® STEP 5 Move to Driver Side Rear Mounting Location (Fig 4). Repeat Steps 3-4 to install the Driver Rear Mounting Bracket. Do not Insert the T-bolt fully tighten hardware at this time. Thread down the M8 with M8 Plastic Plastic Washer Washer in the against the step bar...
- Page 5 iArmor ® (Fig 6) Driver Side Step Bar Installation (4) M8 Plastic Washers (4) M8X1.25-20mm T-Bolts (4) M8 Large Flat Washers (4) M8 Nylon Lock Nuts Front Bottom View Customer Support: info@iarmorauto.com Rev. 20221201...
Need help?
Do you have a question about the iArmor EDGE IA-N189H and is the answer not in the manual?
Questions and answers