Advertisement
Quick Links
®
iBoard
READ INSTRUCTIONS CAREFULLY BEFORE
START ING INSTALLATION. REMOVE CONTENTS
FROM BOX AND VERIFY ALL PARTS ARE PRE-
SENT. ASSISTANCE IS RECOMMENDED.
*BODY FRAME MOUNT
*NO DRILLING REQUIRED
PART LIST
Driver Side Step Bar
Driver Front Mounting
iBoard
by APS
Bracket (DFM)
Driver Rear Mounting
Bracket (DRM)
Customer Support: info@iboardauto.com
Fastener Size
Tightening Torque (ft-lbs)
6mm
8mm
10mm
12mm
14mm
Front
Passenger Front Mount-
ing Bracket (PFM)
Passenger Rear Mount-
ing Bracket (PRM)
1
®
PART#: IB-060C&H
6-7
16-18
31-32
56-58
92-94
Passenger Side Step Bar
Rev. 20230301
Required
X
√
X
√
X
Advertisement
Related Manuals for APS iBoard IB-060C
Summary of Contents for APS iBoard IB-060C
- Page 1 ® ® iBoard by APS PART#: IB-060C&H Fastener Size Tightening Torque (ft-lbs) Required READ INSTRUCTIONS CAREFULLY BEFORE START ING INSTALLATION. REMOVE CONTENTS FROM BOX AND VERIFY ALL PARTS ARE PRE- SENT. ASSISTANCE IS RECOMMENDED. 16-18 √ 10mm 31-32 12mm 56-58 √...
- Page 2 iBoard ® Hardware Package A (For Bracket Installation) Item Description Item Description M12 Short Bolt Plates M12 Large Flat Washers M12 Long Bolt Plates M12 Lock Washers M12 Hex Nuts M12X1.75-45mm Hex Bolts Hardware Package B (For Stainless Steel Step Bar Installation) Item Description Item...
- Page 3 iBoard ® STEP 1 Start installation from the driver side front of the vehicle. Locate the factory rectangular hole on the inner side of the frame be- (Fig 3B) M12 Long Bolt Plate hind the front body mount, (Fig 1). Front (Fig 3A) Inside View Of M10 Long Bolt Plate Installed (In Driver Side Frame Channel)
- Page 4 iBoard ® STEP 4 STEP 5 Move to the Driver Side Rear Mounting Location. Locate the Once all (2) Driver side mounting brackets are installed, then factory rectangular on the frame below the rear body mount, proceed to the Step Bar installation. (Figs 7 & 8) (Fig 5).
- Page 5 iBoard ® Slider (2) Carriage Bolts Slider with (2) Carriage Bolts Step Bar (Bottom View) (Fig 7) Slider Installation Mounting Bracket Step Bar Slider (w/ installed (2) M8 Large Flat Washers Carriage Bolts) (2) M8 Nylon Lock Nuts (Fig 8) Step Bar Installation Customer Support: info@iboardauto.com Rev.
Need help?
Do you have a question about the iBoard IB-060C and is the answer not in the manual?
Questions and answers