Advertisement
Quick Links
®
iBoard
READ INSTRUCTIONS CAREFULLY BEFORE START ING
INSTALLATION. REMOVE CONTENTS FROM BOX AND
VERIFY ALL PARTS ARE PRESENT. ASSISTANCE IS
RECOMMENDED.
*ROCKER PANEL MOUNT
*NO DRILLING REQUIRED
PART LIST
Driver Side Step Bar
iBoard
by APS
Driver Front Mounting
Bracket (DFM)
Driver Rear Mounting
Bracket (DRM)
Customer Support: info@iboardauto.com
Fastener Size
Tightening Torque (ft-lbs)
6mm
8mm
10mm
12mm
14mm
Front
Passenger Front Mounting
Bracket (PFM)
Passenger Rear Mounting
Bracket (PRM)
1
®
PART#: IB-012C&H
6-7
16-18
31-32
56-58
92-94
Passenger Side Step Bar
Rev. 20230401
Required
X
√
√
√
X
Advertisement
Related Manuals for APS iBoard IB-012C&H
Summary of Contents for APS iBoard IB-012C&H
- Page 1 ® ® iBoard by APS PART#: IB-012C&H Fastener Size Tightening Torque (ft-lbs) Required READ INSTRUCTIONS CAREFULLY BEFORE START ING INSTALLATION. REMOVE CONTENTS FROM BOX AND VERIFY ALL PARTS ARE PRESENT. ASSISTANCE IS RECOMMENDED. 16-18 √ 10mm 31-32 √ 12mm 56-58 √...
- Page 2 iBoard ® Hardware Package A (For Bracket Installation) Item Description Item Description M10 Bolt Plates M12 Lock Washers M12 Short Bolt Plates M12 Hex Nuts M12 Long Bolt Plates M10 Large Flat Washers M12 Plastic Washers M10 Lock Washers M10 Plastic Washers M10 Hex Nuts M12 Large Flat Washers Hardware Package B (For Stainless Steel Step Bar Installation)
- Page 3 iBoard ® STEP 1 Starting on the driver side front of the vehicle, Locate the rec- tangular factory hole on the side of the frame behind the front body mount, (Fig 1). Front Front (Fig 2) M12 Long Bolt Plate Install Location (On Driver Side Front Mounting Location) (Fig 1) Driver Side Front Mounting Location STEP 2...
- Page 4 iBoard ® STEP 3 (1) M10 Bolt Plate (1) M10 Plastic Washer (1) M10 Large Flat Washer (1) M10 Lock Washer (1) M10 Hex Nut Move to driver side rear mounting location, (Fig 5 & 6). From the back of the frame channel, insert the M10 Bolt Plate through the factory hole.
- Page 5 iBoard ® Slider (2) Carriage Bolts Slider with (2) Carriage Bolts Step Bar (Bottom View) (Fig 8) Slider Installation Mounting Bracket Step Bar Slider (w/ installed (2) M8 Large Flat Washers Carriage Bolts) (2) M8 Nylon Lock Nuts (Fig 9) Step Bar Installation Customer Support: info@iboardauto.com Rev.
Need help?
Do you have a question about the iBoard IB-012C&H and is the answer not in the manual?
Questions and answers