Aps premium 6in black running boards compatible with ford transit full size van 15-25 (10 pages)
Summary of Contents for APS iBoard IB-003S
Page 1
® ® iBoard by APS PART#: IB-003S/011/003C&H Fastener Size Tightening Torque (ft-lbs) Required READ INSTRUCTIONS CAREFULLY BEFORE START ING INSTALLATION. REMOVE CONTENTS FROM BOX AND VERIFY ALL PARTS ARE PRESENT. ASSISTANCE IS 16-18 √ RECOMMENDED. 10mm 31-32 √ 12mm...
Page 3
iBoard ® STEP 1 Line Up Clip Nuts With Factory Round Hole Starting on the driver side front of the vehicle. Locate the (3) mounting locations along the rocker panel & pinch weld. Each mounting location on the rocker panel is comprised of a rectan- Factory Hole In Pinch gular hole with a round hole and (1) hole on pinch weld, ( Figs Weld Pictured From...
Page 4
iBoard ® ets. Secure the Step Bar to the installed Brackets by using (6) STEP 4 M8 Large Flat Washers and (6) M8 Nylon Lock Nuts and (3) Sliders, (Fig 6). Do not fully tighten hardware at this time. Move along the vehicle to the driver side center & rear mount- ing location.
Need help?
Do you have a question about the iBoard IB-003S and is the answer not in the manual?
Questions and answers