Advertisement
Quick Links
®
iBoard
by APS
READ INSTRUCTIONS CAREFULLY BEFORE START ING
INSTALLATION. REMOVE CONTENTS FROM BOX AND
VERIFY ALL PARTS ARE PRESENT. ASSISTANCE IS
RECOMMENDED.
*BODY FRAME MOUNT
*NO DRILLING REQUIRED
PART LIST
Driver Side Step Bar
iBoard
Front
Driver Front Mount-
ing Bracket (DFM)
Driver Rear Mount-
ing Bracket (DRM)
Customer Support: info@iboardauto.com
Fastener Size
Tightening Torque (ft-lbs)
6mm
8mm
10mm
12mm
14mm
Passenger Front Mount-
ing Bracket (PFM)
Passenger Rear Mount-
ing Bracket (PRM)
1
®
PART#: IB-084C&H
Required
6-7
16-18
31-32
56-58
92-94
Passenger Side Step Bar
Rev. 20230301
X
√
X
X
X
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for APS iBoard IB-084C
Summary of Contents for APS iBoard IB-084C
- Page 1 ® ® iBoard by APS PART#: IB-084C&H Fastener Size Tightening Torque (ft-lbs) Required READ INSTRUCTIONS CAREFULLY BEFORE START ING INSTALLATION. REMOVE CONTENTS FROM BOX AND VERIFY ALL PARTS ARE PRESENT. ASSISTANCE IS 16-18 √ RECOMMENDED. 10mm 31-32 12mm 56-58...
- Page 2 iBoard ® Hardware Package (For Stainless Steel Step Bar Installation) Item Description Item Description M8X1.25-35mm Carriage Bolts M8 Nylon Lock Nuts M8 Large Flat Washers Sliders (Packed with Step Bars) Customer Support: info@iboardauto.com Rev. 20230301...
- Page 3 iBoard ® STEP 1 STEP 2 Start installation toward the front of the driver side of the vehi- Repeat Step 1 to install the driver side rear brackets. cle. Remove the factory body mount bolt (Fig 1). Select (1) Mounting Bracket. Insert the factory body mount bolt through the appropriate slot, the rubber bushing and back into the vehi- STEP 3 cle.
- Page 4 iBoard ® Slider (2) Carriage Bolts Slider with (2) Carriage Bolts Step Bar (Bottom View) (Fig 3) Slider Installation Mounting Bracket Step Bar Slider (w/ installed (2) M8 Large Flat Washers Carriage Bolts) (2) M8 Nylon Lock Nuts (Fig 4) Step Bar Installation Customer Support: info@iboardauto.com Rev.
Need help?
Do you have a question about the iBoard IB-084C and is the answer not in the manual?
Questions and answers