Advertisement
Quick Links
®
iBoard
by APS
READ INSTRUCTIONS CAREFULLY BEFORE START ING
INSTALLATION. REMOVE CONTENTS FROM BOX AND
VERIFY ALL PARTS ARE PRESENT. ASSISTANCE IS
RECOMMENDED.
*ROCKER PANEL MOUNT
*NO DRILLING REQUIRED
Driver Side Step Bar
iBoard
Front
1#
2#
2#
Customer Support: info@iboardauto.com
Fastener Size
Tightening Torque (ft-lbs)
6mm
8mm
10mm
12mm
14mm
1#
2#
2#
1
®
PART#: IB-097/098
Required
6-7
16-18
31-32
56-58
92-94
Passenger Side Step Bar
Rev. 20211201
√
√
X
X
X
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for APS iBoard IB-097
Summary of Contents for APS iBoard IB-097
- Page 1 ® ® iBoard by APS PART#: IB-097/098 Fastener Size Tightening Torque (ft-lbs) Required READ INSTRUCTIONS CAREFULLY BEFORE START ING INSTALLATION. REMOVE CONTENTS FROM BOX AND √ VERIFY ALL PARTS ARE PRESENT. ASSISTANCE IS 16-18 √ RECOMMENDED. 10mm 31-32 12mm...
- Page 2 iBoard ® Mounting Bracket List Item Description Item Description Driver/Passenger Front Mounting Brackets Mounting Brackets Hardware Package A (For Bracket Installation) Item Description Item Description M8Χ1.25-30mm Hex Bolts M8 Lock Washers M8 Flat Washers Hardware Package B (For Aluminum Step Bar Installation Only, Not Supply to SS. Step Bar) Item Description Item...
- Page 3 iBoard ® STEP 1 Starting on the driver side front of the vehicle, remove the exist- ing (2) factory bolts, (or plastic plugs), on the side panel located by the front tire opening, (Fig 1). This will be the mounting loca- tion for the driver side front Mounting Bracket.
- Page 4 iBoard ® (2) M8X1.25-30mm Hex Bolts (2) M8 Flat Washers (2) M8 Lock Washers (Fig 5) Slip M6X1-20mm Square Head Front Bolts Into The Bottom Channels (2) M6X1-20mm Square Head Bolts (2) M6 Large Flat Washers (Fig 4) Driver Rear Mounting Bracket Installation Pictured (2) M6X1 Nylon Lock Nuts TORQUE FOR IMPORTANT:...
- Page 5 iBoard ® Attention Do periodic inspections to the installation to make sure that all hardware is secure and tight. In order to protect your bars/boards, please use mild soap/non-abrasive products for cleaning only. (Fig 7) Slide & line up the U-Slider with the installed mounting brackets along bottom channel (2) M6X1-20mm Hex Bolts (2) M6 Large Flat Washers...
Need help?
Do you have a question about the iBoard IB-097 and is the answer not in the manual?
Questions and answers