Advertisement
Quick Links
®
iBoard
by APS
READ INSTRUCTIONS CAREFULLY BEFORE START ING
INSTALLATION. REMOVE CONTENTS FROM BOX AND
VERIFY ALL PARTS ARE PRESENT. ASSISTANCE IS
RECOMMENDED.
*ROCKER PANEL MOUNT
*DRILLING MAY BE REQUIRED
PART LIST
Driver Side Step Bar
iBoard
Front
1#
3#
1#
3#
1#
3#
Customer Support: info@iboardauto.com
1
®
PART#: IB-179/208/209C&H
Fastener Size
Tightening Torque (ft-lbs)
6mm
8mm
10mm
12mm
14mm
2#
4#
2#
4#
2#
4#
Required
√
6-7
16-18
√
31-32
X
56-58
X
92-94
X
Passenger Side Step Bar
Rev. 20240201
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for APS iBoard IB-179C
Summary of Contents for APS iBoard IB-179C
- Page 1 ® ® iBoard by APS PART#: IB-179/208/209C&H Fastener Size Tightening Torque (ft-lbs) Required READ INSTRUCTIONS CAREFULLY BEFORE START ING INSTALLATION. REMOVE CONTENTS FROM BOX AND √ VERIFY ALL PARTS ARE PRESENT. ASSISTANCE IS 16-18 √ RECOMMENDED. 10mm 31-32 12mm...
- Page 2 iBoard ® Mounting Bracket List Item Description Item Description Driver Side Mounting Brackets Driver Side Support Brackets Passenger Side Mounting Brackets Passenger Side Support Brackets Hardware Package A (For Bracket Installation) Item Description Item Description M8X1.25 Hex Nuts M8 Bolt Plates M8 Plastic Washers M8X1.25 Nylon Lock Nuts M8X1.25-30 Hex Bolts...
- Page 3 iBoard ® STEP 1 Remove the M8X1.25-30 Hex Bolt from the welded nut on the Bolt/Nut Plate. Rotate the Bolt/Nut Plate until the threaded nut Starting at the passenger side front of the vehicle, remove the lines up with the remaining hole in the Mounting Bracket and sealing tape covering the factory holes on the side of the inner body panel.
- Page 4 iBoard ® Factory threaded holes on body panel M8 Plastic Washer (Fig 5) Thread Plastic Washer onto Bolt Plate to hold Bolt Plate Factory holes on pinch weld in position Front Bolt End of M8 (1) M8 Large Flat Washer (Fig 7) Passenger Side Front Mounting Location (Mid 2015-On, Bolt/Nut Plate (1) M8 Lock Washer...
- Page 5 iBoard ® IMPORTANT: Some models are not equipped with factory holes and will require drilling through the pinch weld to attach the Support Bracket. Do not drill through pinch weld at this time. PFM/PCM/PRM (1) M8X1.25-30mm Hex Bolt Front (2) M8 Large Flat Washers (1) M8X1.25 Nylon Lock Nut (Fig 11) Passenger Side Center Mounting Location PFS/PCS/PRS...
- Page 6 iBoard ® Slider (2) Carriage Bolts Slider with (2) Carriage Bolts Step Bar (Bottom View) (Fig 13) Slider Installation Mounting Bracket Step Bar Slider (w/ installed (2) M8 Large Flat Washers Carriage Bolts) (2) M8 Nylon Lock Nuts (Fig 14) Step Bar Installation Customer Support: info@iboardauto.com Rev.
Need help?
Do you have a question about the iBoard IB-179C and is the answer not in the manual?
Questions and answers