Page 1
® ® iBoard by APS PART#: IB-022C&H Fastener Size Tightening Torque (ft-lbs) Required READ INSTRUCTIONS CAREFULLY BEFORE START ING INSTALLATION. REMOVE CONTENTS FROM BOX AND VERIFY ALL PARTS ARE PRE- SENT. ASSISTANCE IS RECOMMENDED. 16-18 √ 10mm 31-32 12mm...
Page 3
iBoard ® STEP 1 STEP 3 Start the installation under the Passenger side of the vehicle. Repeat Steps 1 & 2 for Passenger Center Mounting Bracket Remove the front body mount hex bolt, (Fig 1 & 2). Do not re- (PCM) and Passenger Rear Mounting Bracket (PRM) installa- move rubber bushings.
Page 4
iBoard ® Slider (2) Carriage Bolts Slider with (2) Carriage Bolts Step Bar (Bottom View) (Fig 3) Slider Installation Mounting Bracket Step Bar Slider (w/ installed (2) M8 Large Flat Washers Carriage Bolts) (2) M8 Nylon Lock Nuts (Fig 4) Step Bar Installation Customer Support: info@iboardauto.com Rev.
Need help?
Do you have a question about the iBoard IB-022C and is the answer not in the manual?
Questions and answers