Download Print this page

APS iBoard IB-069C Manual

Black powder coated 5 inches running boards nerf bars side steps compatible with chevy suburban 1992-1999

Advertisement

Quick Links

®
iBoard
READ INSTRUCTIONS CAREFULLY BEFORE START ING
INSTALLATION. REMOVE CONTENTS FROM BOX AND
VERIFY ALL PARTS ARE PRESENT. ASSISTANCE IS
RECOMMENDED.
*BODY FRAME MOUNT
*NO DRILLING REQUIRED
PART LIST
Driver Side Step Bar
Driver Front Mounting
Bracket (DFM)
Driver Rear Mounting
Bracket (DRM)
iBoard
by APS
Note: *Driver Front / Passenger Rear Bar Brackets are universal
*Passenger Front / Driver Rear Bar Brackets are universal
Customer Support: info@iboardauto.com
Fastener Size
Tightening Torque (ft-lbs)
6mm
8mm
10mm
12mm
14mm
Front
Passenger Front Mounting
Passenger Rear Mounting
1
®
PART#: IB-069C&H
6-7
16-18
31-32
56-58
92-94
Passenger Side Step Bar
Bracket (PFM)
Bracket (PRM)
Rev. 20230601
Required
X
X

Advertisement

loading
Need help?

Need help?

Do you have a question about the iBoard IB-069C and is the answer not in the manual?

Questions and answers

Summary of Contents for APS iBoard IB-069C

  • Page 1 ® ® iBoard by APS PART#: IB-069C&H Fastener Size Tightening Torque (ft-lbs) Required READ INSTRUCTIONS CAREFULLY BEFORE START ING INSTALLATION. REMOVE CONTENTS FROM BOX AND VERIFY ALL PARTS ARE PRESENT. ASSISTANCE IS RECOMMENDED. 16-18 √ 10mm 31-32 √ 12mm 56-58 √...
  • Page 2 iBoard ® Hardware Package A (For Bracket Installation) Item Description Item Description Spacer Washers M12 Large Flat Washers M12X1.75-120mm Hex Bolts M12 Lock Washers Hardware Package B (For Stainless Steel Step Bar Installation) Item Description Item Description M8X1.25-35mm Carriage Bolts M8 Nylon Lock Nuts M8 Large Flat Washers Sliders (Packed with Step Bars)
  • Page 3 iBoard ® STEP 1 STEP 3 Start installation from the driver side front of the vehicle, tempo- Move toward the driver side rear of the vehicle. Remove the facto- rarily remove the front body mount bolt, steel washer (if ry Hex Nut from the leaf spring bolt, (Fig 2). equipped), and rubber bushing, (Fig 1).
  • Page 4 iBoard ® (3) Slide the Slider (with carriage bolts) to the Step Bar. (4) Repeat to install the other (1) slider to the step bar. (5) Attach the Step Bar (with the Sliders) onto the installed Factory Hex Nut mounting brackets. Position the Sliders to the installed brack- ets.

This manual is also suitable for:

Iboard ib-069hIboard ib-c5069w