System Messages - Furuno FA Manual

6. MAINTENANCE, TROUBLESHOOTING
6.9

System Messages

This sections provides all the error messages which may appear on the display
screen.
Message
Signal Missing
DATUM Continuous
GYRO Continuous
LOG Continuous
EPFS Continuous
TRIGGER Continuous
VIDEO Continuous
AZIMUTH Continuous
HEADLINE Continuous
ARPA Alarm
COLLISION Continuous
GUARD Continuous
LOST Beep
ARPA SYSTEM Continuous
ERROR
TARGET-FULL Continuous
(AUTO+MAN)
TARGET-FULL Continuous
(AUTO)
TARGET-FULL Continuous
(MAN)
AIS Alarms
COLLISION Continuous
LOST Beep
ARPA FUSION Beep
RECEIVE None
GUARD Continuous
CPA/TCPA Continuous
TARGET-FULL None
AIS ALARM Continuous
(Continued on next page)
6-12
System messages
Alarm
Wrong chart datum (only WGS84 is permitted)
No bearing data
No speed log data
No position data
No trigger signal (antenna)
No video signal
No antenna rotation signal
No heading signal
A tracked target's CPA and TCPA fulfill criteria for
collision course
A tracked target is present in the guard zone
A tracked target becomes a lost target
No status data from ARPA
Capacity for automatic and manually acquired targets
has been reached
Capacity for automatically acquired targets has been
reached
Capacity for manually acquired targets has been
reached
A tracked target's CPA and TCPA fulfill criteria for
collision course
A tracked target becomes a lost target
ARPA and AIS target combined
Not receiving AIS data from own AIS (VDO message)
Tracked target is inside the guard zone
CPA/TCPA cannot be calculated; Ground data (VTG, L/L)
no present
Capacity for AIS target has been reached
Alarm received from AIS transponder
Meaning