Table of Contents
Advertisement
SYSTEM CONFIGURATIONS
All NavNet products incorporate a "network circuit board" to integrate each NavNet product
on board through an optional LAN cable (Ethernet 10BASE-T). Each NavNet product is
assigned an IP address to enable transfer of images between other NavNet products. For
example, video plotter pictures can be transferred to a radar and vice versa. Pictures
received via the NavNet may be adjusted at the receiving end.
The number of display units which may be installed depends on the number of network
sounder connected. For a system incorporating three or more products, a "hub" is required
to process data.
For one network sounder: one radar and three plotters
For two network sounder: one radar and two plotters
AIS transponder
Other NavNet unit
(GD-1720C, etc.)
(ex. MODEL 1724C)
AIS Interface
IF-1500AIS*
* Not required
for AIS Transponder
FA-150.
Remote
Controller
RMC-100
Network sounder
ETR-6/10N
ETR-30N
NavNet2 system MODEL 1724C/MODEL 1734C
Antenna Unit
Display Unit
RDP-148
12-24 VDC
v
GPS receiver
GP-310B/320B
Echo sounder
Navigator
External buzzer
PC
Echo sounder
Heading
sensor
Rectifier
PR-62
100/110/115/220/230 VAC
1φ, 50/60 Hz
Advertisement
Table of Contents
