Erasing Nav Lines - Furuno FA Manual

5. VIDEO PLOTTER OPERATION
5.13.4

Erasing nav lines

30 nav lines may be entered. You may erase unnecessary nav lines as shown
below. A nav line which is currently in use cannot be erased.
Erasing individual nav lines
1. Roll the trackball to choose the MENU box at the right side of the screen and
then push the left button.
2. Roll the wheel to choose 8 [NAV LINE•WPT] and then push the wheel or the
left button.
3. Roll the wheel to choose 8 [NAV LINE SET] and then push the wheel or the
left button.
4. Roll the wheel to choose 2 NAV LINE NO. SELECT and then push the wheel
or the left button.
5. Use the wheel to enter nav line no., in two digits.
6. Roll the wheel to choose 5 CLEAR DATA.
7. Push the wheel or the left button to delete the nav line.
8. Push the right button three times to close the menu.
5-30
[NAV LINE SET]
1 BACK
2 NAV LINE NO. SELECT
00
3 NAV LINE NAME
4 NAV LINE ENTRY
— — —
— — —
— — —
— — —
— — —
— — —
— — —
— — —
— — —
— — —
5 CLEAR DATA
NAV LINE SET menu