Adjusting Brilliance Of Screen Data - Furuno FA Manual

1. RADAR OPERATION
1.38

Adjusting Brilliance of Screen Data

You can adjust relative brilliance levels of various markers and alphanumeric
readouts displayed on the screen.
1. Roll the trackball to choose the BRILL box at the bottom left corner of the
screen and then push the right button to show the BRILL menu.
[BRILL1 MENU (1/2)]
1 ECHO COLOR
YEL/GRN/
WHT/COLOR*
2 BKGD COLOR
BLK-GRN/
BLK-RED/
BLU-CIR/
BLU/BRT-BLU
3 PANEL DIMMER
4 CHARACTER
5 CURSOR
6 ECHO
7 TRAIL
8 HL
9 RING
0 NEXT
2. Roll the wheel to choose item you wish to adjust and then push the wheel or
the left button. (To go to the second page of the BRILL menu choose 0 NEXT
and push the wheel.)
Item
1 ECHO COLOR
2 BKGD COLOR
3 PANEL
DIMMER
4 CHARACTER
5 CURSOR
6 ECHO
7 TRAIL
8 HL
9 RING
3. Roll the wheel to set brilliance level. The range of adjustment for items
except "HL" and "CURSOR" is 0-100%. The range of adjustment for HL and
CURSOR is 50-100%.
4. Push the right button once or twice to close the menu.
1-74
* Not available
on IMO radar.
Choose 0 NEXT
to show page 2
of the BRILL menu.
Note: Four brilliance and color sets are
provided. For further details see
paragraph 1.44.
BRILL menu
Page 1
Adjusts
brilliance of;
See para. 1.49.
See para. 1.49.
Backlighting of
control unit
All alphanumeric
characters
Cursor (+) and
arrow
Radar echoes
Target trails
Heading line
Range rings
[BRILL1 MENU (2/2)]
1 BACK
2 BRG CURSOR
3 EBL
4 VRM
5 INDEX LINE
6 ARP SYMBOL
7 AIS SYMBOL
8 L/L GRID
9 MARK
0 CHART
Page 2
Item
2 BRG CURSOR
3 EBL
4 VRM
5 INDEX LINE
6 ARP
SYMBOL
7 AIS SYMBOL
8 L/L
9 MARK
0 CHART
Adjusts
brilliance of;
Bearing cursor
EBLs
VRMs
Index lines
ARP symbols
AIS symbols
Chart grid
All marks
Chart