FUTABA 8UHPS Instruction Manual page 61

Revolution IDL1 Curve Example
-25%
1 2
LOW ← throttle stick → HI
Inputting Revolution Five-Point Curves
The Revolution Normal function is on at startup.
It can be turned ON/OFF with the (+)/(-) keys.
Top arrow indicates the current stick
position (2 arrows means it's between
points)
Curve Point Value
Curve Name
(Range: 0 - +100%)
Display
Initial curve settings:
(NORM)
POS1 = 0%
POS2 = 25%
POS3 = 50%
POS4 = 75%
POS5 = 100%
Revolution Idle-Up 1 & Idle-Up 2 Curve Setting
The REVOLU IDL1 &/or IDL2 functions will not operate until the
OFST1 and/or OFST2 functions are activated, which also
activates the IDL1 & IDL2 Pitch & Throttle curve menus.
You can activate idle-up 1 and idle-up 2 independently.
The curve inputting procedure is the same as normal curve
described above.
+100%
+50%
10%
0%
0%
-10%
-17%
-50%
-100%
3 4 5
Curve Point
Curve points 1-5
The bottom arrow shows the point
on the five-point curve currently
being set.
Input 5-point curve values
Move the lower arrow to the
position you want to set with the
CURSOR keys (the curve point is
indicated by the arrow below the
numbers 1-5, and the current
throttle position is above the
numbers). Enter the desired curve
value with the (+)/(-) keys.
• If you're unhappy with what you've
set, you may return to the default
value by pressing the (+) and (-)
keys simultaneously.
Revolution IDL2 Curve Example
-17%
-25%
1 2
Curve Point
LOW ← throttle stick → HI
The blinking item on the
setting screen is the
current setting item.
To REVOLU NORM
or IDL1 function
To REVOLU IDL2 or INVERT function
58
+100%
+50%
10%
0%
0%
-10%
-50%
-100%
3 4 5
These keys are used
to move through the
To PI-CRV five submenus in the
function REVOLU function.
To REVOLU
Data input keys
IDL1 function