FUTABA 8UHPS Instruction Manual page 10

Specifications and ratings are subject to change without notice.
• 8UH Transmitter, including RF module
• R148DP/DF Receiver, R138DP/DF, or R149DP Receiver
• Servos, five S3001 , five S9202, four S3001, or four S9001, with mounting hardware and
servo arm assortment
• Switch harness
• Extension cord
Transmitter T8UHFS/HPS (Helicopter
Version)
Operating system: 2-stick, 8 channels,
PCM1024 system
Transmitting frequency: 29, 35, 36, 40, 41, 50,
60 or 72 MHz bands
Modulation: FM/PPM or PCM, switchable
Power supply: 9.6V NT8S600B Ni-Cd battery
Current drain: 250 mA
Servo S9202 (Coreless, ball-bearing)
Control system: Pulse width control, 1.52 ms
neutral
Power requirement: 4.8V (from receiver)
Output torque: 69.5 oz-in (5.0 kg-cm)
Operating speed: 0.22 sec/60°
Size: 1.59 x 0.79 x 1.40" (40.4 x 19.8 x 36 mm)
Weight: 1.7 oz (48.2 g)
• Memory module – the optional DP-16K
models from 8) and allows you to transfer programs to another 8UH transmitter.
• Transmitter battery pack – the NT8S600B transmitter Ni-Cd battery pack may be easily
exchanged with a fresh one to provide enough capacity for extended flying sessions
• Trainer cord – the optional training cord may be used to help a beginning pilot learn to fly
easily by placing the instructor on a separate transmitter. Note that the 8UH transmitter may
be connected to another 8UH/8UA system, as well as to any F5, Skysport, Super 7, or 9Z
series transmitter.
• Neckstrap – a neckstrap may be connected to your 8UH system to make it easier to handle
and improve your flying precision, since your hands won't need to support the transmitter's
weight
Receiver R148DP/DF (PCM or FM
Dual conversion)
Receiving frequency: 29, 35, 36, 40, 41, 50,
60 or 72 MHz bands
Intermediate freq.: 10.7 MHz and 455 kHz
Power requirement: 4.8V Ni-Cd battery
Current drain: 14 mA
Size: 2.19 x 1.00 x 0.89" (55.5 x 25.5 x
22.5 mm)
Weight: 1.07 oz (30.4 g)
Servo S3001 (Standard, ball-bearing)
Control system: Pulse width control, 1.52
ms neutral
Power requirement: 4.8V (from receiver)
Output torque: 41.7 oz-in (3.0 kg-cm)
Operating speed: 0.22 sec/60°
Size: 1.59 x 0.78 x 1.41" (40.4 x 19.8 x 36
mm)
Weight: 1.59 oz (45.1g)
doubles your model storage capability (to 16
7