Time Server - Bosch VIP X1 Installation And Operating Manual

VIP X1 | Installation and Operating Manual

Time server

The VIP X1 can receive the time signal from a time server using various time
server protocols, and then use it to set the internal clock. The unit polls the time
signal automatically once every minute.
Unit time zone:
Select the time zone in which your system is located.
Daylight saving time:
The internal clock can automatically switch between normal and daylight saving
time (DST). The unit already contains the data for DST-switchovers up to the
year 2015. These can be used or modified, if required.
Note
If you do not create a table, there will be no automatic switching. When
editing the table, please note that the values generally occur in linked pairs
(DST start and end dates).
– First check the timezone setting. If it is not correct, select the appropriate
timezone for the system, and click the Set button.
– Click the Details button. A new window will open showing an empty table.
– Select the region or the city which is closest to the system's location from the
list box below the table.
– Click the Generate button to fill the table with the preset values from the unit.
– Click one of the entries in the table to make changes. The entry will be high-
lighted.
– Clicking the Delete button will remove the entry from the table.
– Choose other values from the list boxes under the table, to change the
selected entry. Changes are immediate.
Bosch Security Systems | 2006-12 | V2.5
EN | 35
Configuration using a Web browser