Time Server; Daylight Saving Time; Time Server Ip Address - Bosch VIP X1600 Installation And Operating Manual

34 en | Configuration Using a Web Browser
5.9

Time Server

The VIP X1600 modules can receive the time signal from a time server using various time
server protocols, and then use it to set the internal clock. The unit polls the time signal
automatically once every minute.
The VIP X1600 module in Slot 1 is the default time server for the modules in Slot 2 to Slot 4.
In this case, the Time server IP address field can be empty for Slot 2 to Slot 4 (0.0.0.0).
5.9.1 Unit time zone
Select the time zone in which your system is located.
5.9.2

Daylight saving time

The internal clock can switch automatically between normal and daylight saving time (DST).
The unit already contains the data for DST switch-overs up to the year 2015. You can use
these data or create alternative time saving data if required.
NOTICE!
i
If you do not create a table, there will be no automatic switching. When changing and clearing
individual entries, remember that two entries are usually related to each other and dependent
on one another (switching to summer time and back to normal time).
1.
2.
3.
4.
5.
6.
7.
8.
9.
5.9.3

Time server IP address

Enter the IP address of a time server.
V3.5 | 2007.12
First check whether the correct time zone is selected. If it is not correct, select the
appropriate time zone for the system, and click the Set button.
Click the Details button. A new window will open and you will see the empty table.
Select the region or the city which is closest to the system's location from the list field
below the table.
Click the Generate button to generate data from the database in the unit and enter it into
the table.
Make changes by clicking an entry in the table. The entry is selected.
Clicking the Delete button will remove the entry from the table.
Select other values from the list fields below the table to change the entry. Changes are
made immediately.
If there are empty lines at the bottom of the table, for example after deletions, you can
add new data by marking the row and selecting required values from the list fields.
Now click the OK button to save and activate the table.
Installation and Operating Manual
VIP X1600
Bosch Security Systems