Chapter 4 Installation - Bosch VIP X1 Installation And Operating Manual

VIP X1 | Installation and Operating Manual
Installation
Thanks to its ultra-compact dimensions, the VIP X1 is particularly well suited to
installation in cabinets.
Caution
The unit is intended for use indoors or in housings. Select a suitable loca-
tion for installation where the unit will not be subjected to conditions of ex-
treme temperature or humidity. The ambient temperature must be be-
tween 0 and +50°C (+32 and +122°F); the relative humidity must not
exceed 80%.
The unit generates heat during operation, so you should ensure that there
is adequate ventilation and enough clearance between the unit and heat-
sensitive objects or equipment.
Please ensure the following installation conditions:
Do not install the unit close to heaters or other heat sources. Avoid locations
exposed to direct sunlight.
Allow sufficient space for running cables.
Ensure that the unit has adequate ventilation.
When making connections, use only the cables supplied or use appropriate
cables immune to electromagnetic interference.
Position and run all cables so that they are protected from damage, and pro-
vide adequate cable strain relief where needed.
Avoid impacts, blows and severe vibrations as these can irreparably damage
the unit.
Bosch Security Systems | 2006-12 | V2.5
EN | 19
4
Installation