Bosch VIP X1 Installation And Operating Manual page 33

VIP X1 | Installation and Operating Manual
Note
Proper password protection is only guaranteed when all higher authoriza-
tion levels are also protected with a password. If a live password is as-
signed for example, a service and a user password must also be set.
As a result, you should always assign passwords beginning with the high-
est authorization level service.
User name:
The VIP X1 operates with three user names: service, user and live, which cor-
respond to different authorization levels.
The service user name is the highest authorization level. After entering the cor-
rect password, you can access all the functions of the VIP X1 and change all
configuration settings.
The user user name is the middle authorization level. You use it to operate the
unit and also to control cameras, but you cannot change the configuration.
The live user name is the lowest authorization level. It can only be used to view
the live video image and switch between the different live image displays.
Password:
You can define and change a separate password for each user name if you are
logged in as service or if the unit is not password protected.
Enter the password for the selected user name here.
Confirm password:
Enter the new password a second time to eliminate typing mistakes.
Note
The new password is only saved when you click the Set button.
You should therefore click the Set button immediately after entering and
confirming a password, even if you also wish to subsequently assign a
password to another user name.
Bosch Security Systems | 2006-12 | V2.5
EN | 33
Configuration using a Web browser