Connections On The Rear Panel - Bosch VIP X1 Installation And Operating Manual

VIP X1 | Installation and Operating Manual

Connections on the rear panel

5 USB port
for connecting a USB storage medium (external hard drive)
6 Factory reset button
to restore factory default settings
7 Terminal block
for alarm inputs, relay output, serial interface and power supply
8 Operating status LED
lights up green when ready for operation
9 LED L
lights up green when the unit is connected to the network
10 LED T
flashes orange when data is being transmitted over the network
11 RJ45 socket ETH
for connecting to an Ethernet LAN (local network),
10/100 MBit Base-T
For more information about the LEDs see page 126. For information about the
terminal block connections see page 127.
Bosch Security Systems | 2006-12 | V2.5
EN | 17
Product description