Main Menu Navigation - Skoda RADIO NAVIGATION SYSTEM COLUMBUS - FOR OCTAVIA Manual

40 Selector key NAV (Navigation)

Main menu Navigation

– Press the selector key
NAV
will be displayed.
– Press the selector key
NAV
⇒ fig. 15
has not been displayed.
Fig. 15 Main navigation
menu with address.
Fig. 16 Select route option.
. The last opened menu in the navigation
again if the main menu Navigation
and set
Position

– opens a window with information about your current location. When in
Position
this menu you can store the displayed location by pressing
memory.
– stores the current position as "flagged destination" in the destination menu.

Only one destination can be stored in the destination memory under "flagged
destination". If the flagged destination is not renamed, it is overwritten by renewed
pressing of .

Further function keys in the main navigation menu
– opens a selection menu to select the type of destination entry.
New dest.
•
New dest. - serves for the entry of a new destination.
•
– for changing over into the tour mode if more than two destina-
Tour mode
tions still have be driven during route guidance.
Memory – opens a pop-up window:
•
– for selection of an already stored travel destination.
Load destination
•
Save destination – to store the displayed travel destination in the main menu
Navigation.
•
– switches over to the destination memory.
Edit memory
– opens a pop-up window during route guidance:
Route
•
– displays a list with street names or street descriptions of those parts
Route list
of the journey still to be driven during route guidance.
•
– use the direction arrow to display a list with turning points still to be
Man. list
driven during route guidance.
•
– for manual entry of a route block.
Congestion ahead
•
Cancel lexclusion – to cancel manually a route block.
– opens a pop-up window:
Extras
•
– for inputting an additional destination which
Enter intermediate destination
must still be driven during route guidance.
•
– for switching over into the waypoint mode if in non-digitalised
Waypoint nav.
areas, specific points are set (Offroad Navigation).
– starts route guidance to the displayed travel destination.
Start
Save in the destination