Skoda RADIO NAVIGATION SYSTEM COLUMBUS - FOR OCTAVIA Manual page 47

Entering a travel destination via coordinates
Map/GPS
– When in the menu New destination, press the function key
– Press the function key on the map display. The coordinates of the
GPS
last travel destination for which a route guidance was started are
displayed. If no travel destination was approached, the coordinates of
the current location will be displayed.
– Press the function key
Latitude
sponding input mask.
– By pressing on and , you can move the character entry cursor
 
within the input fields or change to the next input field.
– When in the input mask, press on a character shown in the keypad
block to accept it behind the character input cursor. Existing charac-
ters will be overwritten.
– Press on if the desired latitude or longitude is displayed in the
OK
entry fields.
– Pressing , will erase characters from right to left as of the position

of the character input cursor. By pressing
closed without the entries being accepted.
If the entered coordinates are outside the stored navigation area, a pop-up window
will open with the following information: "The unit cannot process these GPS
coordinates. Please check your inputs." Press
and to correct your inputs.
Selecting a stored destination
Call up the menu New destination from the main menu Navigation. In
the menu New destination the selectable function keys are only those for
which destinations have already been stored. For example,
Map/GPS
or to open the corre-
Longitude
the input mask will be

to close the pop-up window
OK
Last destinations is only selectable if route guidance has already been
started.
.
Starting a route guidance to a stored "Home address"
– Start with the menu New destination and press the corresponding
function key. If a home address has been stored, the unit will change
to the map display and route guidance will start automatically.
Start route guidance to a stored "Favourite destination", to another
destination from the destination memory or from the list of "last
destinations"
– Start with the menu New destination and press the corresponding
function key.
– A list of stored destinations will be displayed, e.g. the list Last destina-
tions.
– Press the display of a destination in the left column. The unit will
change to the map display and route guidance to this travel destina-
tion will start automatically.
– Press on the function key
in the opening pop-up window, to open the corre-
Show details
sponding destination in the detailed display.
Selector key NAV (Navigation)
behind the destination and press

45