Skoda RADIO NAVIGATION SYSTEM COLUMBUS - FOR OCTAVIA Manual page 63

The function key in the map display during a route guidance
... / ...
⇒ page 60, fig. 25
Pressing the function key
... / ...
with set-ups for route guidance.
– stops route guidance at the current position. The route guid-
Stop route guidance
ance can be continued at any time by pressing the function key
Start route guidance .
– calls up the menu New destination in order to enter a stop-
Add intermed. dest.
over destination to be approached during current route guidance.
– for manual entry of a route block.
Congestion ahead
– to change the parameters for route calculation.
Route options
– stores the current position as flagged destination in the destination memory.

For further functions of the navigation, open the main menu Navigation by
pressing the selector key .
NAV
Control media source
The function key displays the currently selected media source (here the
Radio 2
radio station "Radio 2"). To control the selected media source, briefly press the
function key and select a station (radio mode) or title (media mode) by pressing the
selection in the pop-up window.
Radio mode: The six station keys of the main menu RADIO are faded in.
Media mode: The title name and the function keys for controlling the current
media source are faded in.
Function keys
Extras
Pressing the function key will open a pop-up window for further set-ups and
Extras
displays.
– shows the currently selected travel destination in the map
Destination view
display in the main menu Navigation. Use the function key on the right under the
compass display to center the map again on the vehicle position.
– will change between day and night design.
Day/Night
– will open the additional window. The additional window can be
Split screen
opened or closed in the map display by pressing the selector key
 Lane guidance
more than one lane, a small additional window with lane recommendations will be
will open a pop-up window
inserted in the map. A tick in the checkbox
on.
and
Navigation
Scale modification and display
Pressing the function key with the display of the currently selected map dimension
at the bottom right will insert further function keys for changing the map detail and
the map scale. If not used, these function keys fade out again after five seconds.

few seconds it will switch back automatically to the last selected zoom display
(smaller scale).
+
move the sliding regulator
 - 
ance.

active, the map scale will change automatically depending on the driven route
(Motorway trip: small map scale - City center: large map scale). The switched-on
Autozoom is displayed in the scale display by
manually change the scale with the set button
Display favourite symbol
A favourite category can be determined for stored destinations.
Favourite destinations are displayed in the map, depending on set-up, with their
assigned favourite symbol.
.
MAP
– during route guidance, when driving and turning on roads with
– briefly switches the map display to the overview display (large scale). After a
or - – to zoom in or out of the map, i.e.changing the map scale. Alternatively,

within the scale.
– switches to the overview map with start and finish point during route guid-
– for switching on the autozoom during a route guidance. If "Autozoom" is
Symbol Description

Infrastructure

Private

Restaurant
Range selector key MAP
 indicates that the function is switched
 . Press again to switch off or

A
.
8
61