Table of Contents
Advertisement
60
Range selector key MAP
Range selector key MAP
Map display
By pressing the selector key
MAP
display.
Pressing the selector key
MAP
will open or close an additional window in the map
display, where further information can be displayed and selected ⇒ page 63,
"Additional window in the map display".
During route guidance the map display will differ in some points from the "normal"
map display. During the route guidance the driven route will be highlighted, symbol
, shows the current vehicle position
third function key
and the distance to the destination and, behind
mated time of arrival or driving time will be displayed.
Parts of the road ahead can also be blocked manually during route guidance.
Use the function key
to insert or fade out the bar with the function keys in each
display.
Fig. 25 3D map display
during a route guidance (map
section moved).
you can move from any menu into the map
⇒ fig. 25
- in the bottom line behind the
Center the map display for vehicle position or travel destination
You can move the indicated map section by pressing your finger on the touch-
screen and sliding it over the touchscreen.
If you have moved the touch-screen section, a further function key will be inserted
at the top right under the compass display function key
function key will center the map again for the current vehicle position.
In some map displays you can center the display of the travel destination with the
function key
.
Change the type of display
The symbol in the second function key
type of display. To change these, briefly press press the function key and select a
different type of display in the pop-up window by pressing the selection again.
-2D – Two-dimensional: Plan view of a conventional map display.
-3D – Three-dimensional: Map display, diagonally from the front in bird's-eye
perspective.
-Topographic – Plan view of a conventional map display with coloured display
of various terrains (Mountains, Valleys etc.).
The function key
Navigation
Pressing on the function key
for navigation.
– starts route guidance or continues route guidance to the
Start route guidance
travel destination selected in the Navigation.
the esti-
Enter new destination
destination selected in the main menu Navigation.
– to change the parameters for route calculation.
Route options
– stores the current position as flagged destination in the destination memory.
For further functions of the navigation system, e.g. changing the travel destination,
open the main menu Navigation by pressing the selector key
⇒ fig.
,
or
shows the currently selected
in the map display without route guidance
will open a pop-up window with settings
Navigation
– calls up the menu New destination to change the travel
25. Pressing this
.
NAV
Hide quick links:
Advertisement
Table of Contents
