Skoda RADIO NAVIGATION SYSTEM COLUMBUS - FOR OCTAVIA Manual page 52

50 Selector key NAV (Navigation)
– Press if you wish to end the tour input. The travel destination of

your tour and the next stopover destination is displayed in the main
menu Navigation.
– Press the function key
Start
over destination of your tour.
– Press the function key
Memory
tour under its own name in the destination memory ⇒ page 50,
"Storing a tour".
In the menu Tour plan: New tour "New Tour" acts as a replacement for a name
which you can allocate for this tour when the tour is stored.
Storing a tour
A tour can only be displayed in the tour mode and therefore stored only
in the tour mode.
– Press function key
Memory
displayed in the main menu Navigation.
– Press on in the pop-up window. An entry window for free
Save tour
text entry will open.
– Allocate a name for your tour.
– Confirm the displayed name by pressing
– The message "Tour stored" will appear. Press
message.
You can store max. 10 tours in the destination memory.
to start route guidance to the first stop-
to permanently store the displayed
⇒ page 48, fig. 19
to store a tour
.
OK
to confirm the
OK
Calling up a stored tour
– Press on the function key
Extras
then on .
Tour mode
– Press on the function key Memory
window.
– Press the function key next to a tour name in the menu Load tour

to display information relating to the corresponding tour in the menu
Tour details.
– Press the function key
Select
directly on the name of a tour when in the menu Load tour so that the
selected tour is displayed in the main menu Navigation
– Press the function key to start the route guidance.
Strat
Editing a stored tour
A tour can only be displayed in the tour mode and therefore only stored
in the tour mode. Call up the tour to be edited.
– If you press at the top of the selected tour message the tour plan for
this tour will open.
– Alternatively, open the tour plan by pressing the function key
Press on in the pop-up window.
Edit tour
– Press on the function key next to the destination in the tour plan
you wish to process. The pop-up window with the possible options for
processing this input will open.
in the main menu Navigation and
and on Load tour in the pop-up
when in the menu Tour details or press
Extras .
