Skoda RADIO NAVIGATION SYSTEM COLUMBUS - FOR OCTAVIA Manual page 54

52 Selector key NAV (Navigation)
– Once you have reached the destination of a waypoint tour, the
waypoint mode will close automatically and the "normal" main menu
Navigation will open again.
When in the menu Waypoint navigation, the last active waypoint tour and its
current geo-position will be displayed. If no waypoint tour has been recorded or all
of them have been deleted, a corresponding message will be inserted. In this case
the function keys for starting, loading or processing a waypoint tour are not active.
If a waypoint tour is displayed, the waypoint tour ⇒ page 53, "Driving a stored
waypoint tour" will be started by pressing the function key
The following menus and sub-menus are operated analog to the already described
menus of the navigation system and will no longer be described here in detail:
•
Pressing on a displayed entry or the function key
detailed display.
•
Pressing the function key

the accompanying input.
The function key
New dest.
Pressing the function key
New dest.
– switches back into the waypoint mode.
Back
– terminates the waypoint mode and opens the menu New
Onroad destination
destination for selection of an "Onroad destination" from the available navigation
data.
The function key
Memory
Pressing the function key Memory
– opens a list of the stored waypoint tours. Press the corresponding
Load tour
waypoint tour for selection.
– opens the waypoint tour memory. Stored waypoint
Edit waypoint tour memory
tours can be displayed, renamed or deleted.
The function key
Waypoint tour
Pressing the function key
Waypoint tour
new waypoint tour or to process the displayed one.
.
Start
will always open the

opens a pop-up window for analog processing of
will open a safety interrogation:
will open a pop-up window:
will open a pop-up window to display a
– starts after naming the waypoint tour, selecting an accept-
Record waypoint tour
ance mode and displaying a new waypoint tour. A displayed waypoint tour is auto-
matically stored and can be called up later from the
– opens a list with the waypoints of the tour currently displayed
Edit waypoint tour
in the menu Waypoint navigation. The waypoints in the list can be displayed,
deleted, moved or renamed in the map. Further waypoints can be added via the
selection from the map or the input of the GPS position. If a different waypoint tour
has to be processed instead of the one displayed, it must first of all be called up
from the with .
Memory Load tour
Display a waypoint tour
– Press on the function key
Waypoint
tion.
– Press on the function key Load tour
– If a tour is already being displayed in the menu Waypoint navigation
you must select by pressing in the following menu whether you wish
to display the indicated
Extend existing tour
via .
Memory Load tour
Fig. 21 Display in the map
illustration with an addi-
tional window in the
compass display.
in the menu Waypoint naviga-
in the pop-up window.
or a .
New tour