Skoda RADIO NAVIGATION SYSTEM COLUMBUS - FOR OCTAVIA Manual page 55

– Give a short and clear name to the waypoint tour. Confirm the
displayed name by pressing
– Select an acceptance mode by pressing the respective key.
– Press the function key
Automatic
set the waypoints (recommended) during the display.
– Press the function key
Manual
during the display.
– After starting the display, the number of used and still available
waypoints as well as the set display mode will be indicated in the
menu Waypoint navigation.
– Press the selector key to change into the map display. Repeated
MAP
pressing of the selector key
MAP
⇒ page 52, fig.
window 21.
– Press on the selector key
NAV
Waypoint navigation.
– Press the function key
Store current position as waypoint
waypoints manually. When in the map display you can find this func-
tion key in the pop-up window for the function key
⇒ page 52, fig. 21 ⇒ page 53, "Function key in the map display".
Function key in the map display
Record
The waypoints used up to now for the tour and those still available are indicated in
the function key .
Record
⇒ page 52, fig. 21
Pressing the function key
Record
for controlling the display.
– ends the recording: the last set waypoint becomes the endpoint of the
Stop
waypoint tour.
– switches on and off the functions indicating that the
 Automatic recording
waypoints are set automatically via the sensors in the vehicle when changing the
direction. A tick in the checkbox  indicates that the function is switched on.
.
OK
to allow the system to automatically
if you wish to set all waypoints yourself
will open and close the additional
to switch back into the main menu
to set the
Record
– will open a pop-up window
– sets a manual waypoint at the current driving
Add current position as waypoint
position.
Driving a stored waypoint tour
Before you start driving a waypoint tour, you must be in the vicinity of the
desired starting point of this waypoint tour.
Select a waypoint tour
– Press the function key
Memory
– Press on the function key Load tour
– Choose a waypoint tour in the list by pressing on the respective tour.
Driving a waypoint tour
– Press the function key in the menu Waypoint navigation. The
Start
menu Starting from which waypoint will open. Starting and finishing
points of the waypoint tour are displayed at the top.
– Press the function key
Reverse waypoint tour
selected tour in the opposite direction.
Stopping the route guidance
– Press the third function key at the bottom of the map display for infor-
mation about the distance to the closest waypoint and
in the pop-up window.
Stop route guidance
– Alternatively, press the selector key
key .
Stop
When driving
Follow the information regarding turns as far as possible. Once you have come as
close as 50 meters to a waypoint, the drive recommendation will appear for the
next waypoint.
Selector key NAV (Navigation)
in the menu Waypoint navigation.
in the pop-up window.
in the menu to drive the
and then press the function
NAV
53