Brush Roll Replacement and Maintenance
Brush Roll Replacement
The Phantom powerhead is equipped to handle a series of interchangeable brush rolls based on
your type of flooring. Each brush roll will have its own unique set of bristles, so depending on
the type of flooring you have there's a brush roll for it. Changing the brush roll is very easy, all
you'll need to do is
1. Make sure power is cut to the head by removing the head from the extendable wand.
2. Unlock the brush roll by turning the knob dial on the side of the head to 'OPEN'
3. Once you've unlocked the brush roll simply slide it out
4. To replace the brush roll slide it back in and lock the knob dial by turning it to 'CLOSE'
27
Need help?
Do you have a question about the Phantom and is the answer not in the manual?