Prolux Phantom Instruction Manual page 14

3. Adjust the length of the main wand. Press down the release latch on the tube to do this.
Then pull the handle of the telescopic tube to extend it to your desired length. Let go of
the release catch while pulling until it locks in place. You will hear a distinct click. Your
vacuum cleaner is now ready for use and the desired attachment can be attached to the
end of the wand.
4. Once you have assembled your vacuum and the desired attachment has been attached to
the hose or wand end feel free to pull the power cord out to the desired length and plug it
into the wall outlet. Turn the vacuum cleaner on with the power button on top of the main
canister.
14
FIG 3